Commands used to Troubleshooting Cisco EIGRP
Friday, April 3, 2009
Filed Under:
Laptop and Mobiles
show ip route: To inspect the routing table.
show ip route eigrp: To filter the routing table and show only the routes learned from EIGRP.
show ip protocols: Verifies autonomous system, timer values, identified networks, and EIGRP neighbors (routing information sources).
show ip eigrp topology: Shows the EIGRP topology table and identifies successors and feasible successors.
show ip eigrp neighbors: To verify that the correct routers are neighbors,
Show ip eigrp traffic: To show the amount and types of EIGRP messages.
Other Recommended Posts on Laptop and Mobiles
Subscribe to:
Post Comments (Atom)